Thermoseal PTG Products

« Back to Previous Page

RG-S160

 


Thermoseal RG-S160 offers exceptional sealability and crush resistance in a wide range of applications. RG-S160 is composed of a blend of aramid, mineral, and cellulose fibers and graphite and other inorganic fillers with a styrene butadiene binder. A factory applied release coating on both sides aids in flange removal. Continuous roll lengths allow efficient and economical fabrication with high speed die cutting equipment. Typical applications range from power sport and other small engine gaskets to heavy duty diesel service with intermittent operating temperatures up to 550° F (288° C).

 

 

Ref. Thickness of Measured Values

0.031" (0.8mm)

Density ASTM F1315

100 lbs/ft3 (1.60 g/cm3)

Compressibility ASTM F36J

8 - 20%

Recovery ASTM F36J

minimum 40%

Tensile Strength ASTM F152

minimum 1160 psi (8 MPa)

Fluid Resistance

  

After immersion in Oil IRM903
    Weight Increase
    Thickness Increase


maximum 45%
maximum 60%

Binder Type

Styrene Butadiene Rubber

ASTM F104 Line Call Out

F729900E09M9

For Additional Information Call Toll Free 1.800.990.7325 or email info@thermosealinc.com.