Thermoseal PTG Products
RG-N120 |
|
Thermoseal RG-N120 is a reinforced cellulose gasket material with a nitrile butadiene rubber binder and inorganic fillers that provides a very good crush resistance at high flange pressures. Continuous roll lengths allow efficient and economical fabrication with high speed die cutting equipment. RG-N120 seals oil, water, and coolants well in applications such as small engine intake and cover gaskets, automotive water pump and throttle body gaskets and similar applications with intermittent operating temperatures up to 350° F (177° C).
|
|
Ref. Thickness of Measured Values | 0.031" (0.8mm) |
Density ASTM F1315 | 75 lbs/ft3 (1.20 g/cm3) |
Compressibility ASTM F36J | 25 - 35% |
Recovery ASTM F36J | minimum 30% |
Tensile Strength ASTM F152 | minimum 1305 psi (9 MPa) |
Fluid Resistance | |
After immersion in Fuel B |
|
Binder Type | Nitrile Butadiene Rubber |
ASTM F104 Line Call Out | F729900E59M9 |
For Additional Information Call Toll Free 1.800.990.7325 or email info@thermosealinc.com. | |
